We take your uploaded .gcode file that was made by your slicer, and parse it line by line, with algorithms to determine where the layers start and end.
It then rewrites the file with all the extra bits you selected into it. We then give you a download link and display what we have added(Nothing is Deleted).
Once you have downloaded your new file, you can load it on to your machine to start printing.
I use this on alot of my prints, it has become the 'Norm'. Unfortunately i only use a few Slicers so it is not compatible with all of them.
- Working with Cura 3.2 and up,Simplify3D(R) Version 3.0.2,CraftWare 1.17 (May Work with Other Slicers)
- Added a pause at layer option, this will pause at the start of the layer.
- This was created for my use, so there is a chance that it may not work correctly for you.
- Report bugs Here
- 07/05/18 Added Terms and Conditions and a Privacy Policy.
- 11/05/18 Added multi Temp Change Feature(10 Max).
- 19/05/18 Added multi pause with comma delimited(1,5,9).
- 23/05/18 Added Layer display as an Option.
- 22/06/19 Should Work With Zhop.
- 23/12/23 Removed ":" When "Display Layers on screen" is ON.
Choose .gcode File
Options
Display Layers on screen: M117
At every Layer it will display it on screen
Perform Pause at Layer: M0
Pause at start of layer (0 = no pause) seperation by ","
Move Z axis 10mm up on each pause
Change Nozzle Temperature: M109
Add temp change at layer start, this will sit and wait for nozzle to reach temperature
+
By Uploading you agree to our Terms and Conditions
Sponsors
